General Maintenance - Furuno BBWX2 Installation Manual

Switch LEDs - 100
GREEN – solid on
OFF
Switch LEDs – Link/Act
YELLOW – solid on
YELLOW – blinking
OFF

5.5 General Maintenance

The following routine maintenance checks should be made:

Examine all cables and grommets for signs of wear and/or damage

Check that all cables are supported and are not stressing the connectors

Check that all connectors are fully inserted and support

Wipe the unit with a clean damp cloth
U.S.A
.
Status
100 BASE-T
10 BASE-T
Status
Connected
Data activity
Not connected
Always turn your Receiver OFF before carrying
out routine maintenance.
Your Receiver is a sealed unit. DO NOT
SEPARATE the unit. There are no serviceable
parts or adjustments inside.
Any internal adjustments must be carried out by an
approved and qualified technician.
BBWX2 INSTALLATION GUIDE
Action
None
None
Action
None
None
None
Page 15 of 15