Ce Compliance - Agilent Technologies 4107 User Manual

The following symbols appear on the instrument for your
information.

CE Compliance

Your Agilent 4107 Nitrogen Generator has been designed to comply
with the requirements of the Electromagnetic Compatibility (EMC)
Directive and the Low Voltage (electrical safety) Directive (commonly
referred to as the LVD) of the European Union. Agilent has
confirmed that each product complies with the relevant Directives by
testing a prototype against the prescribed EN (European Norm)
standards.
Proof that a product complies with these directives is indicated by:


Agilent 4107 Nitrogen Generator User's Guide
Direct current
When attached to the rear of the instrument, it indicates that the product
complies with the requirements of one or more EU directives.
When attached to the rear of the product, indicates that the product has
been certified (evaluated) to CSA 61010.1 and UL 61010-1.
When attached to the rear of the product, indicates that the product
complies with the South Korean Electromagnetic Compatibility (EMC) law
applicable to Industrial and scientific use equipment.
When attached to the rear of the instrument, indicates that the product
complies with the requirements of ACMA.
When attached to the rear of the instrument, indicates that the product
complies with the requirements of WEEE ROHS directive.
the CE Marking appearing on the rear of the product, and
the documentation package that accompanies the product
containing a copy of the Declaration of Conformity. The
Declaration of Conformity is the legal declaration by Agilent that
the product complies with the directives listed above, and shows
the EN standards to which the product was tested to
demonstrate compliance.
Safety Practices and Hazards
9