Sewing Head Service Position - Pfaff 3519-5/01 Instruction Manual

13

Sewing head service position

.04
5
Fig. 13 - 01
Move the sewing head into home position.
● Open the cover 1 and the tensioning lever on the loading clamp.
● Loosen the screws 2 and push the loading clamp in the direction of the arrow until it
stops.
● Raise the frame 3 and hook in the support 4.
● Open the tensioning lever 5.
● Pull the sewing back until it stops and tilt if necessary.
The sewing head can be pulled out of the machine stand for maintenance and
adjustment work.
3
4
Switch off the machine!
Risk of injury due to accidental machine start-up!
Tilt the sewing head with both hands!
Risk of crushing between the sewing head and the machine stand!
Adjustment
1
2
2
67