Time Screen - ZyXEL Communications WAP6906 User Manual

The following table describes the labels in this screen.
Table 22 Maintenance > Password
LABEL
Old Password
New Password
Retype to Confirm
Apply
Cancel

10.4 Time Screen

Use this screen to configure the WAP6906's time based on your local time zone. To change your
WAP6906's time and date, click Maintenance > Time. The screen appears as shown.
Figure 33 Maintenance > Time
The following table describes the labels in this screen.
Table 23 Maintenance > Time
LABEL
Manual
New Time
(hh:mm:ss)
Chapter 10 Maintenance
DESCRIPTION
Type the default password or the existing password you use to access the system in this field.
Type your new system password (up to 30 characters). Note that as you type a password,
the screen displays an asterisk (*) for each character you type.
Type the new password again in this field.
Click Apply to save your changes back to the WAP6906.
Click Cancel to reload the previous configuration for this screen.
DESCRIPTION
Select this radio button to enter the time and date manually. If you configure a new time
and date, Time Zone and Daylight Saving at the same time, the new time and date you
entered has priority and the Time Zone and Daylight Saving settings do not affect it.
This field displays the last updated time from the time server or the last time configured
manually.
When you select Manual, enter the new time in this field and then click Apply.
WAP6906 User's Guide
60