The Wps Button - ZyXEL Communications WAP6906 User Manual

Figure 2 Rear Panel
The following table describes the items on the rear panel.
Table 2 Rear Panel Ports
LABEL
WPS
RESET
PWR / DC IN
LAN1~LAN2

1.6 The WPS Button

Your WAP6906 supports WiFi Protected Setup (WPS), which is an easy way to set up a secure wireless
network. WPS is an industry standard specification, defined by the WiFi Alliance.
Chapter 1 Introduction
WPS Button
Reset Button
LAN LEDs and
LAN Ports
Power Cable
Power Button
DESCRIPTION
Press the WPS button to establish a secure wireless connection using WiFi Protected
Setup (WPS). See Section 1.6 on page
Press the button to return the WAP6906 to the factory default settings. See
1.7 on page 14.
Connect the power cable to the DC IN and press the power button to start the
device.
Connect computers or other Ethernet devices to Ethernet ports for Internet access.
WAP6906 User's Guide
13
13.
Section