Mbss Monitor - ZyXEL Communications WAP6906 User Manual

Table 9 Monitor > Wireless Monitor
LABEL
Packets Transmitted
Successfully
Bytes Transmitted
Association Table
Access Point
Wi-Fi Client
VAP
RSSI (dbm)
TX PHY Data Rate
(Mbps)
SNR
Rx Bytes
Tx Bytes
BW
Time Associated
Refresh

6.5 MBSS Monitor

Go to Monitor > MBSS Monitor. A Multiple Basic Server Set (MBSS) allows you to use your WAP6906 to
provide several Basic Server Sets (BSS) simultaneously. This screen shows a summary of the BSS
configured in your WAP6906.
Chapter 6 Monitor
DESCRIPTION
This shows the number of packets that have been successfully transmitted by the WAP6906.
This shows the number of bytes that have been transmitted by the WAP6906.
The table displays after you click the Association Table button.
This shows the MAC address of the AP to which the WAP6906 is connected.
This shows the MAC address of the wireless client which is associated with the WAP6906.
This shows the SSID name of the wireless network to which the WAP6906 is connecting.
This shows the RSSI (Received Signal Strength Indicator) of the WAP6906's wireless
connection.
This shows the current data rate of the connected AP or client.
This Signal-to-Noise Ratio (SNR) is the ratio between the received signal power and the
received noise power.
This shows the number of bytes that have been received by the connected AP or client.
This shows the number of bytes that have been transmitted by the connected AP or client.
This shows the wireless bandwidth allowed for the connected wireless clients.
This shows the total amount of time (in seconds) the WAP6906 has been associated with the
AP or client.
Click the Refresh button to refresh the WAP6906 settings.
WAP6906 User's Guide
41