3.1 Overview
The Web Configurator is set to Easy Mode by default. This mode is useful to users by visualizing their
networks' layout. You can view details about the devices connected to your WAP6906 and their status.
When you log in to the Web Configurator, the following screen opens.
Figure 5 Easy Mode: Network Map
3.1.1 What You Can Do
You can do the following in this mode:
• Use the Navigation Panel to opt out of the Easy mode
• Use the Network Map screen to check if your WAP6906 can ping the gateway and whether it is
connected to the Internet
• Use the Status screen to view read-only information about the WAP6906, including the WAN IP, MAC
address of the WAP6906 and the software version
3.2 Navigation Panel
Use this navigation panel to opt out of the Easy mode.
(Section 3.3 on page
23).
(Section 3.4 on page
WAP6906 User's Guide
22
C
H A P T E R
Easy Mode
(Section 3.2 on page
22).
24).
3