Networking Screen - ZyXEL Communications WAP6906 User Manual

Figure 21 LAN and WAN IP Addresses

7.4 Networking Screen

Use this screen to change your basic LAN settings. Click Network > Networking.
Figure 22 Network > Networking
The following table describes the labels in this screen.
Table 12 Network > Networking
LABEL
LAN IP
IP Address
Chapter 7 Network
DESCRIPTION
Select DHCP to deploy the WAP6906 as a DHCP client in the network. When you enable this,
the WAP6906 gets its IP address from the network's DHCP server (for example, your ISP or
router). Users connected to the WAP6906 can now access the network (i.e., the Internet if
the IP address is given by the ISP or a router with Internet access). When you select this, you
cannot enter an IP address for your WAP6906 in the field below.
Select Static IP if you want to specify the IP address of your WAP6906. Or if your ISP or
network administrator gave you a static IP address to access the network or the Internet.
Type the IPv4 address of your WAP6906 in dotted decimal notation if you select Static IP.
WAP6906 User's Guide
45