Ap List Screen - ZyXEL Communications WAP6906 User Manual

The following table describes the general wireless LAN labels in this screen.
Table 19 Networking > AP Connection > Station
LABEL
Network
Name(SSID)
Connection
Status
Encryption
Pre-Shared Key
Apply
Cancel

9.4 AP List Screen

You can use this screen to select an AP and enter its WiFi password to connect the wireless network.
After connecting to an AP its SSID is automatically displayed in the Station screen.
Click Networking > AP Connection > AP List. The screen appears as shown.
Figure 30 Networking > AP Connection > AP List
DESCRIPTION
Enter the name of the wireless network to which the WAP6906 is connecting
This shows whether the WAP6906 is already connected, attempting to connect, or not
connected to a wireless network.
Select the data encryption method the wireless network uses.
Enter the password that the WAP6906 uses to connect to the wireless network.
Click Apply to save your changes back to the WAP6906.
Click Cancel to reload the previous configuration for this screen.
WAP6906 User's Guide
56