Wps Screen - ZyXEL Communications WAP6906 User Manual

The following table describes the labels in this screen.
Table 20 Networking > AP Connection > AP List
LABEL
Connection Status
Current SSID
SSID
MAC Address
Channel
RSSI (dbm)
Security
AP
Passphrase
Connect
Rescan

9.5 WPS Screen

Use this screen to enable/disable WPS, view or generate a new PIN number. To open this screen, click
Networking > AP Connection > WPS.
Figure 31 Networking > AP Connection > WPS
The following table describes the labels in this screen.
Table 21 Networking > AP Connection > WPS
LABEL
WPS Setup
WPS PBC
WPS PIN
Chapter 9 AP Connection
DESCRIPTION
This shows whether the WAP6906 is already connected, attempting to connect, or not
connected to a wireless network.
This shows the name of the AP to which your WAP6906 is currently connected.
This shows the network name of the AP the WAP6906 can detect.
This shows the MAC address of the AP.
This shows the channel the AP uses.
This shows the strength of the AP's radio signal measured in dbm.
This shows Yes if the WAP6906 needs a security password to connect to the AP. It shows No if
the WAP6906 does not need a password to connect.
This shows the name of the AP you click and try to connect.
The Passphrase input box displays when the Security column is Yes for the selected SSID. Enter
the password for this wireless network in the Passphrase input box.
The Connect button appears at the end of the table after you click on a SSID.
Click this button to connect to the selected AP.
Click Rescan to refresh the list of APs available.
DESCRIPTION
Click the Push Button to perform wireless security information synchronization using the Push
Button Configuration (PBC) Method.
This field displays the PIN number for the WAP6906 you will use to perform wireless security
information synchronization using the PIN Configuration Method.
Click the WPS PIN button to establish the synchronization. Click Generate to create a new PIN
and display it in the WPS PIN field.
WAP6906 User's Guide
57