Pin Configuration - ZyXEL Communications WAP6906 User Manual

Figure 13 Example WPS Process: PBC Method
Wireless Client

5.3.2 PIN Configuration

When you use the PIN configuration method, you need to check the client's PIN number and use the
configuration interface of the WAP6906.
Go to your phone settings and turn on WiFi. Open the WiFi networks list and tap WPS PIN Entry to get a
1
PIN number.
Enter the client's PIN number to the PIN field in the Networking > Wireless Network 2.4G or Wireless
2
Network 5G > WPS screen on the WAP6906.
Click the WPS PIN button (or button next to the PIN field) on the WAP6906's WPS screen within two
3
minutes.
The WAP6906 authenticates the wireless client and sends the proper configuration settings to the
wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the
WAP6906 securely.
The following figure shows an example of how to set up wireless network and security on WAP6906 and
wireless client (the Android smartphone in this example) by using PIN method.
Chapter 5 Tutorials
WITHIN 2 MINUTES
SECURITY INFO
COMMUNICATION
WAP6906 User's Guide
32
AP