The Control Panel; Display/Hmi Settings - Siemens IQHeat User Manual

3 The control panel

All images in this document, in the menus in the control panel, are simply example images and should not be
used as a basis for settings.
The control panel is integrated into the processing unit.
Info-button
Push to change between
Main overview and
Main index.
Alarm button with LED
Off: no alarm
Flashing: ongoing alarm
Permanently lit: Alarm ongoing and
acknowledged
Press to to change between alarm menus
3.1

Display/HMI settings

Select and OK knob
Turn to select menues, parameters and parameter
values.
Push: to exit the setting page and
adopt a changed value
Extended push: to go to the Password page
ESC-button
Push to go back to last active page or to cancel
Extended push: go back to the Main overvie w.
1. Hold the ESC key down until the menu with HMI
settings appears or from Main Index choose
Systemobjects > HMI.
2. Select HMI settings to change and press OK.
3. Press OK to save the new setting.
4. Press ECS to return to the Main index.
Parameter
HMI language
Imperial unit
sys.
Reset time
Brightness:
inbuilt
Contrast:
inbuilt
Message
durat: inb.
7
User manual
Settings Explanation
range
English
Svenska
Suomi
Polski
Select
Passive Passive =
Active imperial units
e.g. °C.
0...30 [min]
Login again is
necessary after
this time of
inactivates.
0...31
Display
brightness.
0...99
Display
contrast.
0...15 [s]
The time an
error message
is shown.
IQHeat