Settings bar:
Setting value:
•
select the line: turn the navigation dial
•
switch settings page: press the navigation dial
•
set parameter value: turn the navigation dial
•
close the settings page and apply the changed parameter value: press the navigation dial
•
close the settings page without applying the changed parameter value: press ESC.
3.4
Setting parameters
When only one value is selectable:
Change the value:
•
select new value: turn the navigation dial
•
apply the new value and close the settings page: press the navigation dial
•
keep the old value and close the settings page: press the ESC key.
Setting analogue parameter values:
Change set value:
•
change the value below the arrow: turn the navigation dial
•
apply the new value and close the settings page: press the navigation dial/OK
•
keep the old value and close the settings page: press the ESC key.
A setting bar shows the parameter name and the
current value on a black background.
The line with a tick in front (Fire Set point) shows the
set value
A scale displays the minimum and maximum values
that can be set.
9
IQHeat
User manual