IQHeat
User manual
6.3
System objects
NOTE: Access to the menys in this section requirer login at end user level.
6.3.1
Plant information
Information about the plant name, location address and versions of component parts can be read in the System
parameters menu:
1. From the Main index select Systemobjects.
2. To read the name and location address select Plant information.
3. To check the current versions on connected parts, select Versions.
6.3.2
Restoring the start-up settings
For more information on start-up settings, see 9.5 Save and reset start-up settings and factory settings.
1. From the Main index select Systemobjects.
2. Select Save/load and press OK.
3. Select Execute and press OK to return to the start-up settings.
6.3.3
Language selection
Here you can set the preferred language for the display and snapshot.
1. From the Main index select Systemobjects.
2. Select Language selection and press OK.
3. Select preferred language and press OK.
16