Ethernet Port Eth; Ethernet Connector; Connection Of Ethernet Cable; Connection Of Ethernet Connector - Advantech SmartStart SL302 User Manual

5.8.5 Ethernet Port ETH

The panel socket RJ45 is used for this interface. The Ethernet isolation is 1500 V.
Pin Signal mark
1 TXD+
2 TXD-
3 RXD+
4 —
5 —
6 RXD-
7 —
8 —
The Ethernet cable plugs into the RJ45 connector labeled as ETH (see figure below).
Description
Transmit Data – positive pole
Transmit Data – negative pole
Receive Data – positive pole
—
—
Receive Data – negative pole
—
—
Table 9: Connection of Ethernet connector
Figure 20: Ethernet connector
Figure 21: Connection of Ethernet cable
22
SmartStart SL302
Data flow direction
Input/Output
Input/Output
Input/Output
Input/Output