Ethernet Port Eth; Ethernet Connector; Connection Of Ethernet Cable; Connection Of Ethernet Connector - Advantech SmartStart SL306 User Manual

5.8.5 Ethernet Port ETH

The panel socket RJ45 is used for this interface. The isolation barrier of the Ethernet signal
ports against the ground is 1500 V.
Pin Signal mark
1 TXD+
2 TXD-
3 RXD+
4 —
5 —
6 RXD-
7 —
8 —
The Ethernet cable plugs into the RJ45 connector labeled as ETH (see the figure below).
Description
Transmit Data – positive pole
Transmit Data – negative pole
Receive Data – positive pole
—
—
Receive Data – negative pole
—
—
Table 8: Connection of Ethernet connector
Figure 21: Ethernet connector
Figure 22: Connection of Ethernet cable
22
SmartStart SL306
Data flow direction
Input/Output
Input/Output
Input/Output
Input/Output