Figure 17: Circuit example – connection of power supply
The PWR / IO interface is also designed for the processing of binary input and control
(setting) of binary output.
Binary Input
logical 0 / 1
logic 0
logic 1
The binary input status in the Shell is returned via io get bin0.
Binary Output
The binary output is open in the default configuration. The current of the binary output is
limited by a resettable fuse (200 mA).
Voltage
0 – 0.7 V
1.6 – 36 V
Table 8: Characteristics of binary input
19
SmartStart SL302
Web interface status
On
Off