Touchpad; Removing The Touchpad - Dell NOT21997 Owner's Manual

Steps
1. Slide the battery into the slot on the palm-rest and keyboard assembly.
2. Align the screw holes on the battery with the screw holes on the palm-rest and keyboard assembly.
3. Replace the four screws (M2x4) that secure the battery to the palm-rest and keyboard assembly.
4. Replace the three screws (M2x3) that secure the battery to the palm-rest and keyboard assembly.
5. Connect the battery cable to the system board.
6. Adhere the tape to secure the battery cable to the system board.
Next steps
1. Install the base cover.
2. Follow the procedure in

Touchpad

Removing the touchpad

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery.
About this task
The following image indicates the location of the touchpad and provides a visual representation of the removal procedure.
52 Removing and installing Field Replaceable Units (FRUs)
After working inside your
Before working inside your
computer.
computer.