2. In sequential order (indicated on the heat sink), tighten the seven captive screws that secure the heat sink to the system board.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
Touchpad
Removing the touchpad
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the speakers.
About this task
The following image indicates the location of touchpad and provides a visual representation of the removal procedure.
34
Removing and installing components
After working inside your
computer.
Before working inside your
computer.