Configuring With Web Based Management; Opening Web Based Management - Siemens SINEMA Remote Connect Operating Instructions Manual

Configuring with Web Based Management

4.1

Opening Web Based Management

Calling the start page of the WBM
1. Open the Web browser.
2. In the address bar of the browser enter https://<IP address>. You specify the IP address
during installation.
If you use a port other than 443 as the HTTPS standard port, enter the port number along
with the IP address. A colon ":" must be entered between the IP address and the port
number as a delimiter e.g.: https://192.168.234.1:6443.
Note
You set the port for access to the Web server in the "System > Network configuration >
Web server settings" tab.
Result
The start page of the WBM opens.
SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04
4
35