Backing Up & Restoring - Siemens SINEMA Remote Connect Operating Instructions Manual

4.6.8 Backing up & restoring
You can make up to 30 backup copies of the system settings of the SINEMA RC Server and
reload these when necessary. The individual backup copies are saved in the format *.backup
and can be imported into another system with the same SINEMA RC version.
Requirement for creating backup copies
● The user has been assigned the right "Create backup copies".
● The settings for the backup copy are configured.
Calling the Web page
In the navigation panel, select "System > > Backup & restore".
Displayed entries
In the "Backup copies" tab, a list of the existing backup copies is displayed:
Box
Date
Name of the
creator
Size
Comment
Status
Actions
Configuring settings for backup copies
Requirement
● The user has been assigned the right "Edit system parameters".
Procedure
1. In the navigation panel, select "System > Backup & restore" and the "Settings" tab.
2. Enter the number of permitted backup copies.
SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04
Meaning
Date at which the backup copy was created.
Name of the user who created the backup copy.
File size of the backup copy.
Comment on the backup copy. The text can be entered when creating or importing a
backup copy.
Done The backup copy has been created.
•
Restore: The system settings from the selected backup copy are restored.
•
For this action, you require the user right "Restore the system".
SINEMA RC Server takes the system settings from the selected backup copy
and continues working with these. All settings made up to this point that have
not been saved in a backup copy are lost.
Exporting and saving the selected backup copy as a file ("*.backup).
Removing the selected backup copy from the list.
Configuring with Web Based Management
4.6 System
61