Starting The Wbm; Logon With User Name And Password - Siemens SINEMA Remote Connect Operating Instructions Manual

Configuring with Web Based Management

4.2 Starting the WBM

4.2 Starting the WBM
4.2.1

Logon with user name and password

Procedure
1. Enter a configured user name.
You will find information on the first logon in the section "Logging on after the new
installation".
2. Enter the corresponding password.
You will find information on the first logon in the section "Logging on after the new
installation".
3. Click the "Log on" button. The start page of the WBM opens.
Possibly a user agreement will be displayed, see section "User agreement (Page 86)" If
you click the "Accept" button, the start page appears.
Changing the current password
As a logged-on user, you can change your current password, refer to the section "Changing
the current password (Page 105)".
Logging on after installing new
1. After the new installation log on as user name and password "admin".
2. Click on Log on The WBM page "Change password" opens.
3. Specify the user name and the password for the administrator. The new password must
be at least 8 characters long and contain special characters, upper and lowercase
characters as well as numbers, refer to the section "Permitted characters (Page 21)". The
admin user name is not permitted. The "admin" role is assigned to this user automatically.
This administrator has the right to access all functions and can set up the system. This
includes creating users and assigning roles and rights to them. Click the "Save" button.
4. After saving, you are automatically logged on with the newly created administrator. The
"admin" user is no longer available.
5. Once you have logged on successfully, the start page appears.
Possibly a user agreement will be displayed, see section "User agreement (Page 86)". If
you click the "Accept" button, the start page appears.
36
SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04