Making The Ipsec Settings; Ipsec Profiles - Siemens SINEMA Remote Connect Operating Instructions Manual

4.9.2.3

Making the IPsec settings

Requirement for changing the IPsec VPN settings
The user has been assigned the right "Edit system parameters".
Calling the Web page
In the navigation, select "Security > VPN basic settings" and the IPsec tab.
Configuring the basic setting
Configure the following settings that are valid for all IPsec VPN profiles after you have saved:
Box
Activate
Status
Interval after DPD query
(s)
Timeout after after DPD
query (s)
Interface
4.9.2.4

IPsec profiles

The devices and users are assigned IPsec profiles The profiles contain the settings of phase
1 and phase 2.
Calling the Web pages
In the navigation, select "Security > VPN basic settings" and the "IPsec profile" tab.
SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04
Meaning
When activated, IPSec is used.
Shows whether IPsec is enabled or disabled.
Period after which DPD queries are sent. These queries test whether or
not the remote station is still reachable.
If there is no response to the DPD query, the VPN connection to the re-
mote station is declared to be invalid after this time interval has elapsed.
The interface is the local endpoint of the VPN connection. Via this inter-
face the VPN connection to the VPN partner (SINEMA RC client, device)
is established.
WAN: Connection only via the WAN interface
•
LAN 1-n: Connection via available LAN interfaces:
•
WAN + LAN 1-n: Connection via all interfaces
•
Configuring with Web Based Management
4.9 Security
101