Specifying Communications Relations Between Node Groups; Assigning A Node To A Group - Siemens SINEMA Remote Connect Operating Instructions Manual

4.7.4

Specifying communications relations between node groups

Creation of communication relations between the participant groups
Once the participant groups have been created, you define the communication relations
between the groups.
1. In the navigation, select "Remote connections > Participant groups".
2. Specify the source group. For this group click on the icon
3. On the following page you specify the destination groups. This means groups to which
connections from the source group are permitted.
4. Click the "Save" button.
Result
The communication between the participant groups is specified. You have specified whether
communication between the members of this group is permitted or forbidden.
Changing communication relations between the participant groups
1. In the navigation, select "Remote connections > Communication relations".
2. Click on the icon
"Save" button.
4.7.5

Assigning a node to a group

Assigning participants (users or devices) to one or more groups
1. Click on the icon
Result
The participant groups that have already been created are displayed.
2. Select the group/groups to which the participant will be assigned.
3. Click the "Save" button.
SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04
. Change the relevant communication relations and then click the
in the user or device overview.
Configuring with Web Based Management
.
4.8 User accounts
77