Radio Operation; Aux-In Operation - Victrola VTA-800B Instruction Manual

Select a track number by pressing (
The current track will be added to the end of the program.
NOTE: Repeat Playback and Programmed playback only work in CD Mode.
1. Press "FUNC" button to select the radio mode (LCD Display will show "rAd").
2. Tune the Radio tuner knob to tune in to a station.
In AUX (auxiliary) mode, this unit can play audio from an external device (iPod, MP3 Player, Portable
CD Player, etc.)
When connecting a device that has a headphone jack, use a 3.5mm cable (not included) on both ends
to connect the external device with the apparatus.
1. Press "FUNC" button to select Auxiliary mode (LCD Display will show "AUX").
2. Plug one end of the 3.5mm cable (not included) into the AUX IN jack.
3. Plug the other end of the cable into the headphone jack of the external device.
NOTE: All operations are only available on your external device.
1. Press "FUNC" button to select Bluetooth mode (LCD Display will show "bt").
2. From your external device, go to the Bluetooth Settings Menu and ensure that Bluetooth is turned on.
Then select "VTA-800B" once it appears in the menu.
(If a window asks for a password, fill in "0000" then press "OK" on your external device).
3. A few seconds later you will hear an audible tone indicating the Bluetooth connection was successful.
NOTE: The effective distance between your external device and the unit is about 33ft (10 m).
Compact Disc Handling
Always place the disc on the disc tray with the label side facing upward (compact discs can be played/recorded
•
only on one side)
To remove a disc from its storage case, press down on the center of the case and lift the disc upward, holding it
•
carefully by its edges.
To clean a disc, wipe the surface from the center hole outward towards the outer edge with a soft, dry cloth.
•
Never use such chemicals as record spray, antistatic sprays or fluid, benzine or thinner to clean discs; they will
•
irreparably damage the disc's plastic surface.
Discs should be returned to their cases after use to protect from dust and scratches.
•
Do not expose discs to direct sunlight, high humidity, or high temperature for extended periods of time.
•
Printable CD-R and CD-RW discs are not recommended, as the label side may
•
become sticky and damage the unit.
Use a soft oil-based felt-tipped pen to write information on the label side.
•
Never use a ball-point or hard-tipped pen, as doing so may damage the recorded side.
Do not use irregularly-shaped CDs (octagonal, heart shaped, business card size, etc),
•
as they will damage the unit.
Read all precautions supplied with any CD-R or CD-RW disc
•
Never handle a disc with dirty fingers.
•
Never insert a disc that has a crack on the surface.
•
or ), then press the PROGRAM button.

Radio Operation

AUX-IN Operation

Bluetooth (BT) Operation
Maintenance / Proper Handling
10