Problem Shooting; Return Of The Micro Annular Gear Pump To The Manufacturer - HNP Mikrosysteme mzr-2542 Operating Manual

Micro annular gear pump
Table of Contents

Advertisement

7 The startup/shutdown of a pump
7.5

Problem shooting

If the pump does not start to operate or stops the operation abruptly, please
proceed as follows:
Try to liberate the micro annular gear pump:
 by turning the potentiometer knob back and forth or by sending an analog
 via the control software
 through the micro annular gear pump
 by changing the operating direction of the pump.
If these measures turn out to be ineffective, please contact the service staff of
HNP Mikrosysteme (see chapter 14) and send the pump back to the
manufacturer for inspection.
You should under no condition try to dismantle the pump by yourself. This
Warning
may cause damage to the pump components and consequently annul your
warranty claims.
7.6

Return of the micro annular gear pump to the manufacturer

For the return of a micro annular gear pump and components that have already
been employed, please follow the instructions:
 drain any remaining rests of the delivered liquid from the pump
 flush the pump with an adapted solvent
 remove the filter elements from integrated or loosely delivered filters
 protect all openings against dust with the delivered protective plugs or
 return the pump in its original packing
The service personnel which carries out the repair should be informed about
the condition of the used micro annular gear pump. This is done by means of
the "Declaration of media in contact with the micro annular gear pump and
components" (see chapter 14). This form may also be downloaded from the
web site www.hnp-mikrosysteme.de/download.
The "Declaration of media in contact with the micro annular gear pump and
!
components" must imperatively be filled in. The nature of liquid which entered
into contact with the micro annular gear pump and the components must be
specified.
In case of non-compliance, the sender will be liable for any resulting injure to
persons or any object damage.
Last update: January 2016
voltage signal
screws
Technical data subject to change without prior notice!
Operating manual mzr-2542 / mzr
-
2942
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mzr-2942

Table of Contents