Table of Contents
Advertisement
4 Description of the pump
4.4
Fluidic connectors
The micro annular gear pump head is available with two different liquid
connector versions.
Slip fittings
The micro annular gear pump head is equipped with two front slip fittings with
OD 2 mm for connection of flexible tubes with the ID < 2 mm (such as 1/8"
hose).
The suction side is indicated with the letter »S« the delivery side with
the letter »D«. An arrow in the front of the pump indicates the operating
direction of the shaft.
In order to prevent foreign bodies from penetrating into the pump, the liquid
inlet and outlet are protected by plastic caps. Please remove them before you
assemble the pump.
Manifold assembly
The micro annular gear pump with manifold assembly has been designed for
integration into systems. The benefit of the manifold assembly is diminished
cubage for easier integration of the micro annular gear pump and higher
pressure resistance.
You can see in figure 9 and figure 10 the assembly dimension and in figure 11
the installation position of sealing.
Last update: January 2016
Technical data subject to change without prior notice!
Operating manual mzr-2542 / mzr
-
2942
15
Advertisement
Table of Contents
