Table of Contents
Advertisement
2 Safety instructions
2
Safety instructions
Please comply not only with the general safety instructions listed below, but
also with specific safety instructions mentioned in the following chapters.
2.1
Safety symbols in this operating manual
Non respect of the safety instructions marked with the following signs
represents danger to people:
Non compliance with the safety instructions marked with the following sign
represents a risk of damage to the micro annular gear pump:
Operating instructions machined directly on the pump such as the indication of
liquid input and output should be followed and kept in a clearly readable
condition.
2.2
Staff qualification and training
The staff operating, servicing, inspecting and assembling the pumps must
evidence the appropriate qualification for these works. Areas of responsibility
and competence as well as monitoring of the staff must be precisely regulated
by the operator in charge. If the personnel do not have the necessary
knowledge, they must be trained and instructed accordingly. If necessary, this
can be implemented by the supplier or the manufacturer on behalf of the
operator. Furthermore, the operator in charge must ensure that the content of
the present manual has been fully understood by the personnel.
2.3
Safety-conscious work
The safety instructions listed in this operating manual, applicable national
regulations concerning accident prevention as well as internal work, operation
and safety regulations of the operator must be complied with.
Last update: January 2016
Danger symbol
!
Safety symbol according to
DIN 4844 – W9
Technical data subject to change without prior notice!
Operating manual mzr-2542 / mzr
High voltage symbol
Safety symbol according to
DIN 4844 – W8
Warning
-
2942
7
Advertisement
Table of Contents
