3 Transport and intermediate storage
3
Transport and intermediate storage
3.1
Shipment of the pumps and protection measures
The pumps leaving the factory are secured against corrosion and shocks. The
inlets and outlets of the pumps are protected with plastic plugs in order to
prevent any foreign bodies from penetrating into the device.
3.2
Transport
In order to avoid any transport-related damage, the package must be protected
against shocks. HNP Mikrosysteme guarantees that all goods leave the factory
in the best condition. Any noticed damage should be reported to the
concerned forwarding agent, authorized dealer or to HNP Mikrosysteme
as manufacturer.
3.3
Intermediate storage
Following points concerning pump storage should be observed:
necessary conservation procedure (see also chapter 7.4.1)
the protective caps must be put on
the pump should not be stored in humid places
for storage temperature - refer to chapter 0 of the present manual
10
Technical data subject to change without prior notice!
Operating manual mzr-2542 / mzr
Last update: January 2016
-
2942