Table of Contents
Advertisement
5 Optional modules
5.6
Drive with high torque (optional)
The micro annular gear pump mzr-2542 and mzr-2942 can deliver alternative
with an actuator equipped with an DC-motor with precious metal brushes. The
DC motor uses a high dynamic and is recommended for programmed dosage
operation of the micro annular gear pump. With a control unit it is possible to
manage lower RPM ranges down to 20 RPM. The accuracy of dosage can be
achieved better than 0.5 %.
Motor
Dimensions
diameter of the motor
length of the motor
Data of capacity
Max. voltage
Max. permanent torque
output power
No-Load speed by 18 V
No-Load speed by 20 V
max. permanent current
Terminal resistor
Rotor inductance
RPM speed range
Temperature range
table 18
Technical data of the motor
figure 18
Measurement with special motor
24
22 mm
32 mm
18 V
10 mNm
8,6 W
7100 U/min
6000 U/min
630 mA
9,04
0,4 mH
20– 6.000 U/min
-30 ÷ +85 °C
Technical data subject to change without prior notice!
Operating manual mzr-2542 / mzr
Last update: January 2016
-
2942
Advertisement
Table of Contents
