Sending And Receiving Entries; Entering An Anniversary - Siemens HiPath 4000 Operating Instructions Manual

Display Number
Delete Entry
Delete List
Available Memory
Copy Entry
or:
Copy List
D
Change
o D
+
28
Call up a phone number saved in the mobile telephone's telephone di-
rectory.
Call up a prefix number saved in the NET carrier list. You can extend
this and use it for connection setup.
Delete an entry in the mobile telephone's telephone directory.
Delete the entire telephone directory or the NET carrier list, e.g. when
lending the mobile telephone to another user. The directory is only de-
leted after the security prompt has been confirmed.
Show the total number of entries that can still be saved in the mobile
telephone's telephone directory and the NET carrier list. Up to 200 en-
tries are possible.

Sending and receiving entries

This function is not supported in HiPath Cordless Enterprise and can
only be used in conjunction with Gigaset bases.

Entering an anniversary

You can enter an anniversary for the called party when creating a new
entry and changing an existing entry.
Please proceed as shown in the overview on page 27 to select or cre-
ate an entry.
Use the control key to mark the field for the anniversary.
Confirm with the display key.
Enter the date (day/month), the time (hour/minutes) and the signalling
type.
Note:
• Please note the special features of the mobile telephone's
internal clock, see page 47.
• The 12-hour display is active if "am" or "pm" appears beside
the time. You can change the display mode by pressing the
left display key.
• Ten ringer melodies with display or a display without a ring-
er melody are available for signalling.