Using The Service Codes - Siemens HiPath 4000 Operating Instructions Manual

Function
Destinations
Variable call forwarding
Fixed call forwarding
Speed dialling
Forward number
Switches
Second call
Do not disturb
Call protect
Hunt group
38

Using the service codes

The following table shows the service functions which you can exe-
cute via your mobile telephone either in interactive mode (see over-
view on page 37) or in the service menu by entering the codes dis-
played.
The individual functions must be enabled. The codes are standard
codes. They can be set differently. For more information, consult your
system administrator.
The successful execution of a service function is signalled by a cre-
scendo tone sequence whereas a faulty execution is signalled by a de-
crescendo tone sequence.
Note:
You can answer calls while performing service menu functions
if you quit the service menu.
Explanation/notes
See page 40
See page 40
Not relevant for Hicom
cordless E.
See page 40
Function only available to limit-
ed extent!
You will not receive any more
calls if you activate do-not-dis-
turb. "Do-not-disturb" is dis-
played if the calling party is an
internal caller.
Function not available!
Ask your system administrator!
The hunt group can be activat-
ed and deactivated.
Standard Individual
code code
11
12
13
14
21
22
23
24