Display Keys; Operating Status Display - Siemens HiPath 4000 Operating Instructions Manual

Display keys

Each display key can be programmed with one function. Display key
programming depends on the operating status. A function can be rep-
resented by text or an icon. The following icons exist:
Icon Name
z
Redial
©
Menu
Î
Go Back
[
OK
X
Delete
Up/Down
I
Internal
J
Missed calls
list

Operating status display

The following operating statuses are available:
Operating status
Off status
On or message status
Dial status
(after pressing the talk key
without entering the phone
number)
Ringing status
(after entering the phone
number and pressing the talk
key)
Use
Open a list of the last five phone
numbers called
Open the general menu
Next menu level up,
cancel
Confirm and select function
Delete inputs from right to left
Select function (in dial/ringing and
call status only, see page 5)
Call up system menu
Open the missed calls list, display
text messages
Display
Blank display – calls cannot be re-
ceived.
The user interface of the mobile tel-
ephone is displayed. The base
name is visible.
The user interface of the telephone
system is displayed. The telephone
system functions valid for the oper-
ating status are visible.
The user interface of the telephone
system is displayed. The telephone
system functions valid for the oper-
ating status are visible.
5