Conducting Calls; Internal/External Dialling - Siemens HiPath 4000 Operating Instructions Manual

Conducting calls

c
u
or Start a call with the talk or speakerphone key.
a
k
or You can end a call with the on-hook key or by placing the mobile tele-
phone in the charging shell.
a
You can also use the on-hook key to cancel all functions.

Internal/external dialling

Internal calls are calls within the telephone system. External calls are
calls in the public telephone network.
Preparing a
call
o X
and Enter the phone number and, where applicable, correct individual
characters with the "Delete" display key.
o F
or
For internal dialling:
D
or Enter the internal phone number of the user or use the control key to
open the list of internal users or the mobile telephone's telephone di-
rectory, see page 26.
o D
or For external dialling:
Enter the external code, e.g. "0" , plus the external phone number or
use the control key to open the mobile telephone's telephone directo-
ry, see also page 26.
Note:
Dialling is only possible when the mobile telephone is active.
On or message status is then shown on the display, see
page 5.
Note:
You can also start by pressing the talk key and then enter the
phone number. Each digit is then immediately dialled.
19