Setting Up The Base Station And Charging Cradle (If Included); Connecting The Base Station - Siemens Gigaset A580 User Manual

First steps

Setting up the base station and charging cradle (if included)

The base station and charging cradle are designed for use in enclosed dry
rooms with a temperature range of +5 °C to +45 °C.
¤
Set up the base station and charging cradles at a central location on a flat,
non-slip surface in your house or apartment.
Please note
Pay attention to the range of the base station.
This is up to 300 m in unobstructed outdoor areas and up to 50 m inside
buildings. The range is reduced when Eco Mode (
The phone's feet do not usually leave any marks on surfaces. However, due to
the multitude of different varnishes and polishes used on today's furnishings,
the occurrence of marks on the surfaces cannot be completely ruled out.
Instructions on how to mount the base station and charging cradle to a wall,
¢
see page 48.
Please note:
u
Never expose the telephone to the influence of heat sources, direct sunlight
or other electrical devices.
u
Protect your Gigaset from moisture, dust, corrosive liquids and vapours.

Connecting the base station

¤
First connect the
mains adapter 1.
¤
Then connect the
telephone jack
and insert the cables
into the cableducts.
Please note:
u
The mains adapter
must always be con-
nected, as the phone
will not operate with-
out mains connection.
u
Only use the mains adapter and phone cord supplied. Pin connections on
telephone cables can vary (pin connections
6
2
2
¢
page 32) is activated.
1
1
¢
page 44).
1
1
2