Writing And Editing A Text Message - Siemens Gigaset E365 Manual

Operating the handset
Writing and editing a text
message
The following rules apply when writing a
text message:
The cursor is controlled with t s.
u
u
Characters are added to the left of the
cursor.
Press the pound key # briefly to
u
switch from "Abc" mode to "123," from
"123" to "abc," and from "abc" to "Abc"
(uppercase: 1st letter uppercase, all
others lowercase). Press the pound key
# before entering the letter.
Press the pound key # three times:
u
Shows the selection line of the charac-
ters assigned to the pound key.
u
The first letter of the name of directory
entries is automatically capitalized, fol-
lowed by lowercase letters.
Editing text
When you press a key and hold it, the
characters of that key appear in the bot-
tom display line and are highlighted one
after the other. When you release the key,
the highlighted character is inserted into
the input field. To enter special characters,
see page 20.
The display briefly shows whether upper-
case or lowercase letters or digits are
selected when you switch from one mode
to the next: The bottom text line displays
"abc -> Abc", "Abc -> 123" or "123 -> abc."
20
Order of directory entries
Directory entries are usually sorted in
alphabetical order. Spaces and digits take
first priority. The sort order is as follows:
1. Space (shown here as s)
2. Digits (0–9)
3. Letters (alphabetical)
4. Other characters
To get around the alphabetical ordering of
the entries, insert a space or a digit in
front of the name. These entries will then
move to the beginning of the directory.
Names that you have preceded with an
asterisk will move to the end of the direc-
tory.
Entering special characters
Standard characters
1
Q
1x
Space
2x 1
3x £
4x $
5x ¥
6x ¤
7x
8x
9x
10x
11x
12x
13x
14x
P #
. *
Abc--> 123
, /
123 --> abc
? ( #
! ) @
0 < \
+ = &
- > §
: %
¿
¡
"
'
;
_