Injector Order Information
Injector Order Number
Actual tank size used may vary depending on the design and application of the system. Tank diameter is an approximation for the following:
1. Downflow softener using standard mesh synthetic cation exchange media regenerating with sodium chloride.
2. Upflow softener using standard mesh synthetic cation exchange media regenerating with sodium chloride, an inlet water pressure of 30
to 50 psi (2.1 to 3.4 bar) and water temperature of 60°F (15.6°C) water or warmer. Higher pressures or lower temperatures would need
smaller injectors to avoid lifting the bed.
*Not applicable for EA, EE or EI control valves.
PWSRTA Twin Alternating Series Softeners
Injector Color
V3010-1A
V3010-1B
V3010-1C
V3010-1D
V3010-1E
V3010-1F
V3010-1G
V3010-1H
V3010-1I
Orange
V3010-1J
Light Blue
V3010-1K
Light Green
Typical Tank Diameter
Down
Black
6"
Brown
7"
Violet
8"
Red
9"
White
10"
Blue
12"
Yellow
13"
Green
14"
16"
18"
21"
29
Up*
8"
9"
10"
12"
13"
14"
16"
18"
21"