Table of Contents
Advertisement
Step 1D
Step 2D
Step 3D
Step 4D
Step 5D
Step 6D
Step 7D
Step 8D
PWSRTA Twin Alternating Series Softeners
Diagnostics
Step 1D -
Press and simultaneously for 5 seconds and release. If screen in Step 2D does not
appear the lock on the valve is activated. To unlock press , NEXT, , REGEN in sequence, then
press and simultaneously for 5 seconds and release.
Step 2D –
Software Version. Press NEXT to go to Step 3D. Press REGEN to exit Diagnostics.
Step 3D –
Volume, total used since start-up: This display shows the total gallons treated since startup.
This display will equal zero if a water meter is not installed. Press the NEXT button to go to Step 4D.
Press REGEN to return to previous step.
Step 4D –
Days, total since start-up: This display shows the total days since startup. Press the NEXT
button to go to Step 5D. Press REGEN to return to previous step.
Step 5D –
Regenerations, total number since start-up: This display shows the total number of regenera-
tions that have occurred since startup. Press the NEXT button to go to Step 6D. Press REGEN to return
to previous step.
Step 6D – Error Log: This display shows a history of the last 10 errors generated by the control
during operation. Press or to view each recorded error.
Press NEXT to go to Step 7D. Press REGEN to return to previous step.
Step 7D –
Days, since last regeneration: This display shows the days since the last regeneration
occurred. Press NEXT to go to Step 8D. Press REGEN to return to previous step.
Step 8D –
Volume, since last regeneration: This display shows the volume of water that has been
treated since the last regeneration. This display will equal zero when a water meter is not installed. Press
NEXT to go to Step 9D. Press REGEN to return to previous step.
21
Advertisement
Table of Contents
