Using Intelligent Output Terminals - Hyundai N700 Series Instruction Manual

N700E INSTRUCTION MANUAL
5.4

Using Intelligent output terminals

Run Signal [RUN]
When the [RUN] signal is selected as an intelligent output terminal, the inverter When the [RUN] signal is selected as an intelligent output terminal, the inverter outputs a signal on that
terminal when it is in the Run Mode. terminal when it is in the Run Mode.
The output logicis active low, and is the The output logicis active low, and is the relay type (a,b contact output)
Option Terminal
Code Symbol
0 RUN
Valid for inputs:
Required setting
Notes:
•The inverter outputs the [RUN] signal whenever •The inverter outputs the [RUN] signal whenever
the inverter output exceeds the startfrequency.
The start frequency is the initial inverter output The start frequency is the initial inverter output
frequency when itturns on.
•Output terminal RN0-RN1 is a relay
In case of contact b, setup C16.
•Output terminal RN1-RN2 is a relay
In case of contact b, setup C17.
output terminals
Input
Function Name Function Name
State
ON
Run signal
OFF
C13,C14,C15, C16, C17 , C16, C17
0
tartfrequency.
relay contact a.
relay contact a.
when inverter is in Run Mode
when inverter Stop Mode
5-24
outputs a signal on that
Description Description