Setting The Self-Clean Mode; Delaying The Start Of The Self-Clean; After Self-Cleaning - Siemens HG2415UC, HG2416UC, HG2515UC, HG2516UC Use And Care Manual

Xtronic gas convection range
Table of Contents

Advertisement

Available languages

Available languages

Setting the Self-Clean Mode

1. Touch COOKING MODE.
2. Turn knob until SELF CLEAN mode appears. Press
START.
3. The default cleaning time is 4 hours. To change
cleaning time, turn knob to change number of
hours. Otherwise, continue to step 4 (See Figure 1).
4. Touch START. SELF CLEAN flashes. Press START.
5. REMOVE RACKS appears in the display as a
reminder to remove oven racks (See Figure 2).
6. Touch START again to begin the self clean.
Note: In a normal Self-Clean mode, the door does not
lock at the beginning of the cycle; however, it does lock
prior to reaching the high self clean temperatures. The
door lock symbol will appear in the display at this point.

Delaying the Start of the Self-Clean

Note: The time of day must be correctly set for this
option to work properly. See section "Setting the
Clock" in "Setting Up Your Range", Page 5.
1. Touch COOKING MODE.
2. Turn knob until SELF CLEAN mode appears. Press
START.
3. The default cleaning time is 4 hours. To change
cleaning time, turn knob to change number of
hours. Otherwise, continue to step 4 (See Figure 1).
4. Touch START.
5. Turn knob until DELAYED CLEAN mode appears.
Press START (See Figure 3).
6. SELF CLEAN END appears in the display (See Figure 4).
7. Turn knob to enter the time of day you want the self-
clean to end: Set hours, touch time, set minutes.
8. Touch START. REMOVE RACKS appears in the
display as a reminder to remove oven racks (See
Figure 2).
9. Touch START. The display shows DELAYED CLEAN.
The self-clean will automatically start at the
appropriate time.
Note: In the Delayed Self Clean mode, the door latch
is automatically activated at the beginning of the cycle.
The door lock symbol will appear in the display at this
point.
NOTE
The oven lights do not
operate in the Self
Clean mode.
Care and Cleaning - Oven

After Self-Cleaning:

1. At the end of the programmed cleaning time, the
oven will automatically turn off. SELF CLEAN END
appears in the display. Press OFF to clear.
Note: To cancel or stop while the mode is operating,
touch OFF. The door will not unlock until the oven
reaches a safe temperature.
2. The self-clean mode may produce ash which will
settle in the oven. If this happens, remove ash with a
damp cloth before using the oven.
3. Wipe rack edges with cooking oil to allow for proper
glide. Wipe off excess.
WARNING
If door does not lock, press
Cancel and do not self-
clean; phone 866-
44SIEMENS (447-4363) for
service.
Figure 1
SELF CLEAN
SELF CLEAN
SELF CLEAN
SELF CLEAN
SELF CLEAN
4: 00
4: 00
4: 00
4: 00
4: 00
Figure 2
SELF CLEAN
SELF CLEAN
SELF CLEAN
SELF CLEAN
SELF CLEAN
4: 00
4: 00
4: 00
4: 00
4: 00
REMO
REMO
REMO
REMO
REMOVE RA
VE RA
VE RA
VE RA
VE RACKS
Figure 3
SELF CLEAN
SELF CLEAN
SELF CLEAN
SELF CLEAN
SELF CLEAN
4: 00
4: 00
4: 00
4: 00
4: 00
DELA
DELA
DELA
DELAYED CLEAN
DELA
YED CLEAN
YED CLEAN
YED CLEAN
YED CLEAN
Figure 4
SELF CLEAN
SELF CLEAN
SELF CLEAN
SELF CLEAN
SELF CLEAN
5: 45
5: 45
5: 45
5: 45
5: 45
SELF CLEAN END
SELF CLEAN END
SELF CLEAN END
SELF CLEAN END
SELF CLEAN END
CKS
CKS
CKS
CKS

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hg2416ucHg2516ucHg2515uc

Table of Contents