Answering Calls - UTStarcom UTS 801 User Manual

801 (FSU) User Manual

2.2 Answering Calls

1. When a call is being received, the phone rings.
2. Remove the handset from the cradle of the base.
3. To end a call, hang up the handset.
Κ
Note: If the caller's phone number has more than 16 digits, only the last 16
digits will be displayed.
If you subscribe to a Caller ID service, the calling party information
will be displayed as shown in the figure below after the second ring.
If you subscribe to a Caller ID service and the calling party has
blocked the calling information from being sent, "CALL" will be
displayed as shown in the figure below.
The LCD on the phone will display a call timer in the lower right
hand corner as shown in the figure below.
Missed call
If there is a missed call, "call not ans" will be displayed on the LCD.
Press any key to clear the display on the phone. To check who called
press the search key to enter the Caller list.
Basic Operations 2-5