Selecting A Ringing Volume; Ringing Volume Setting - UTStarcom UTS 801 User Manual

801 (FSU) User Manual

3.3 Selecting a Ringing Volume

3.3.1 Ringing Volume Setting

A ringing tone is heard when there is an incoming call. This function allows
you to select one of the two ringing volume levels (1 - low and 2 - loud)
available. The default volume level setting is 2 – loud.
1. Press and then
the LCD of the phone as shown in the figure below.
2. Press to enter the edit mode, the volume level number will
flash on the LCD of the phone as shown in the figure below.
3. To scroll between the volume levels, press the search
key. You can also change the volume level by pressing the
keys 1 or 2 on the dial pad.
If the volume level is at the maximum level 2, the volume
level will not change when the search
If the volume level is at the minimum level 1, the volume
level will not change when the search
When changing volume levels, the phone automatically
rings. To stop the ringing, press the
4. To save the volume level, press the
beep and the new volume level is displayed.
5. To exit and return to standby mode press
If you do not press any keys for 15 seconds the phone
automatically returns to stand-by mode.
Other Essential Functions 3-3
to display the current ringing volume on
key is pressed.
key is pressed.
key.
key. The phone sounds a
.
or