Setting The Alarm Clock - UTStarcom UTS 801 User Manual

3-6 Other Essential Functions

3.5 Setting the Alarm Clock

This function allows you to set the alarm clock built into the phone for a
specific time. You can set the alarm time or select ON to change the alarm
time or OFF to turn off the alarm. The alarm uses the 24 hours format to set
the alarm. The alarm provides a 30 second burst of tone when the timer
expires to alert you. The volume of the alerting tone is factory set and
cannot be changed.
1. Press and then
(on/off) on the LCD of the phone as shown in the figure below.
If the alarm has been set the LCD will display the current
alarm setting.
2. Press to change the status of the alarm, the options OFF-0 or
ON-1 are displayed in the LCD as shown in figure below.
3. Press or to turn the alarm ON or OFF.
If the alarm is turned OFF, the phone sounds a beep. To exit
and return to stand-by mode press
If the alarm is turned ON, the hour digit of the clock will
flash on the LCD of the phone as shown in the figure below.
To move the cursor between the fields, press the search
or key. To change the value of a field press a valid
numeric key on the dial pad.
4. To save the alarm setting, press the
beep and the new alarm setting is displayed.
801 (FSU) User Manual
to display the current alarm status
on the phone.
key. The phone sounds a