UTStarcom UTS 801 User Manual page 19

801 (FSU) User Manual
2. Firmly insert the plug of the battery into the connector on the base of the
3. Replace the battery cover and then press firmly until a click is heard.
Κ
Note: The battery cord is color-coded, the red line is positive (anode), the
black line is negative (cathode) and the yellow line is a sensor output.
telephone as shown in the diagram below. Be sure that the positive
connector of the plug connects to the positive terminal and the negative
connector connects to the negative terminal of the base station. Snap the
battery into place on the left side and insert the cord into the battery
compartment.
Before Using Your Phone 1-7