Viewing The Caller List; Using The Caller List To Make A Call - UTStarcom UTS 801 User Manual

Table of Contents

Advertisement

801 (FSU) User Manual

2.4 Viewing the Caller List

The last ten phone numbers (maximum of 24 digits each) received by the
phone are stored in memory. To check who has called follow the steps
below.

2.4.1 Using the Caller List to make a call

1. Press
2. To scroll between the phone numbers, press search
to enter the caller list.
"C1" and the last phone number received are displayed as shown in
the figure below.
If the LCD display does not change as shown in the figure below, the
caller list is empty.
C1 designates the most recent or last phone number received; C2
designates a phone number received prior to C1, etc.
If the off-hook
icon is displayed the call is not a missed call.
To search from the most recently received phone number, press
search
To search from the oldest received phone number, press search
If you do not subscribe to a Caller ID service, the calling party
information will be displayed as "---" on the LCD of the phone.
The phone can display a maximum of 16 received digits at once. If
the phone number received is 16 digits, only the first 12 dialed digits
entered are shown in the LCD display. Pressing the
display the 16 digits of the phone number on the LCD of the phone.
If the phone number received exceeds 16 digits, the phone will
automatically display the remaining digits after a two second delay.
Press the
key to return to the previous display.
Basic Operations 2-9
or
.
key will

Advertisement

Table of Contents
loading

This manual is also suitable for:

Uts 801 fsu

Table of Contents