Selecting A Ringing Tone - UTStarcom UTS 801 User Manual

801 (FSU) User Manual

3.4 Selecting a Ringing tone

A ringing tone is heard when there is an incoming call. This function allows
you to select one of the six different types (1 to 6) of ringing tones. The
default ringing tone setting is 1.
Κ
Note: In step3, only keys 1 to 6 can be pressed to select a ringing tone
type.
Κ
Note: In step3, if you do not press any key for 30 seconds the phone
automatically returns to stand-by mode.
1. Press and then
LCD of the phone as shown in the figure below.
2. Press to enter the edit mode, the ringing tone number will
flash on the LCD of the phone as shown in the figure below.
3. To scroll between the ringing tone types, press the search
key. You can also change the ringing tone type by pressing
the keys 1 to 6 on the dial pad.
When changing the ringing tone types, the phone
automatically rings. To stop the ringing, press the
To save the ringing tone, press the
beep and the new ringing tone is displayed.
4. To exit and return to standby mode press
If you do not press any keys for 15 seconds the phone
automatically returns to stand-by mode.
Other Essential Functions 3-5
to display the current ringing tone on the
key. The phone sounds a
.
or
key.