Table of Contents
Advertisement
3. Place the SATA drive (with the HDD bracket) back into the system. Align
the mounting holes on the HDD bracket with the mounting holes on the
SATA drive bay and then use the provided mounting screws to secure
the drive in place.
4. Connect one end to the SATA data connector of the SATA drive and
the other end to the SATA data port on the system board. Connect the
SATA power connector from the PSU to the SATA power connector.
5
Mounting screw
Mounting screw
SATA data connector
SATA power connector
SATA data port
Advertisement
Table of Contents
