6. Connect the other end of the feeder to the ANT interface on the antenna. Take
waterproof measures.
7. Label the feeder cable with plastic.
8. Repeat steps 1 through 7 to install other feeder cables, see
Figure 5-5 ZXSDR R8854 Antenna Feeder Connection Diagram
– End of Steps –
5.3 Installing a Monitoring Cable
This procedure describes how to install a monitoring (MON) cable.
A monitoring cable is used to connect the dry contact interface of an external monitoring
device.
Steps
1. Connect one end of the monitoring cable to the AISG/MON interface at the bottom of
the ZXSDR R8854 chassis, see
SJ-20160405141455-003|2018-01-03 (R1.3)
Figure
5-6.
5-7
ZTE Proprietary and Confidential
Chapter 5 Cable Installation
Figure
5-5.