Zte ZXSDR R8854 Hardware Installation page 36

ZXSDR R8854 Hardware Installation
Figure 4-22 Assembling the Pole Component
1. Screw
2. Fixing clip
2. Assemble the pole component to the pole, and install the screw on the other side of
the fixing clip, see
Figure 4-23 Installing the Pole Component (1)
3. Tighten the nuts on both sides of the pole component with an adjustable wrench with
a torque of 40 N m to fix the pole component on the pole, see
SJ-20160405141455-003|2018-01-03 (R1.3)
3. Flat washer
4. Spring washer
Figure 4-23.
4-18
5. Nut
Figure 4-24.
ZTE Proprietary and Confidential