Installing A Single Rru In Pole Hoop-Mounted Mode - Zte ZXSDR R8854 Hardware Installation

ZXSDR R8854 Hardware Installation
Figure 4-27 Securing the RRUs
– End of Steps –

4.4 Installing a Single RRU in Pole Hoop-Mounted Mode

This procedure describes how to install the ZXSDR R8854 through pole hoops. This
installation mode is applicable to the pole with the diameter of 120 mm-380 mm.
Context
For the required installation accessories of pole hoop-mounted mode, refer to
SJ-20160405141455-003|2018-01-03 (R1.3)
4-22
ZTE Proprietary and Confidential
Table 4-4.